For detailed information, other images and documents, please select individual articles from the following table.
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Call customer service: (23) 418-130
Prices for customers after login
For use as a preventative measure against ignition problems caused by moisture in vehicles and other low-voltage ignition systems
To be used specifically to prevent ignition problems caused by moisture in vehicles and in other low-voltage ignition systems. Cleaning the exterior of ignition cables, the distributor cap and connectors with contact spray acts as a preventive measure against ignition problems caused by moisture. The many small droplets of water that form on the ignition system in cold, damp weather cause voltage discharge to earth, thus reducing the ignition voltage. The reduction in ignition voltage can cause starting difficulties or can even prevent the vehicle from starting at all, especially when combined with very cold conditions and a weak starter battery. The formation of water droplets is encouraged by the presence of dirt and oil. Spraying components with contact spray can provide immediate assistance for this problem.
Briefly spray the entire ignition system in the engine compartment; if necessary, also spray a very thin layer on the inside of the distributor cap. Allow a penetration time of 1 to 2 minutes before starting the system. Do not use the contact spray when the engine is running. Risk of ignition!
For more information, please refer to the technical data sheet.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!