Welcome to Würth Hungary For trade customers only

Aktuális akciónk!

Több, mint 40.000 termék

Hírlevél feliratkozás

Würth App - töltse le még ma!

Ventilation duct sealant - SEAL-VENTDCT-310ML

Ventilation duct sealant

Ventilation duct sealant
SEAL-VENTDCT-310ML

Art.-no. 08923251
EAN 4062856177370
All versions

Prices for customers after login

Show availability in Würth shop
Exclusively for trade customers

Register now and access more than 125,000 products

Odourless, elastic and ecologically safe special sealant

Odourless


No unpleasant odours for users and the environment.



Elastic


Absorbs material stretching over the long-term, thereby preventing joint cracks effectively.



Ageing and weather-resistant



Does not contain any substances that impair paint wetting



Our products featuring the EMICODE label are low emission/environmentally compatible. The EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes.

Notice
  • Please observe the "General Notes on Application for Sealants" overview sheet

  • Further information in the technical data sheet

  • Sufficient air exchange should be ensured during the curing phase

  • A higher coating thickness extends the curing time
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For sealing in ventilation duct and plant construction as well as exhaust air systems in commercial kitchens.

Instructions
  • The surface must be load-bearing, clean, dry and free from grease, rust and water

  • Further information in the technical data sheet

Contents

310 ml

Container

Cartridge

Colour

Grey

Chemical basis

Acrylic resin dispersion

Smell/fragrance

Neutral

Density

1.57 g/cm³

Continuous motion absorption

12.5 %

Shore A hardness

14

Full curing speed

3 mm/d

Fully hardening/curing conditions

23°C and 50% relative humidity

Min. skin-formation time

20 min

Conditions for skin-formation time

at 23°C and 50% relative humidity

Min. temperature resistance

-40 °C

Max. temperature resistance

80 °C

Min. processing temperature

5 °C

Max. processing temperature

50 °C

Shelf life from production

12 Month

Conditions to maintain shelf life from production

frost-free storage area

Coating compatibility

Yes

Ultraviolet resistance

Yes

Paint-wetting impairment substances

No

Silicone-free

Yes

Resistance against

Aging, Citric acid (10%), Disinfectants, Chlorine solution (5%), Acetic acid (5%), Formaldehyde (30%), Isopropyl alcohol, Saline solution, Caustic soda, Soapsuds (20%), Water, Hydrogen peroxide (10%), Weather

Surface pre-treatment required

No

Recoatable/Can be painted over

Conditional, preliminary testing required

Sustainability

Pollutants / Emissions

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Hand cartridge gun high-quality
Hand cartridge gun high-quality

MANCLKGGUN-CART-RED/BLACK-310ML

High-quality design, semi-open, made of sheet steel with plastic handle
x 1 pcs
Cartridge gun
Cartridge gun

MANCLKGGUN-CART-14:1-(UPTO-310ML)

Sturdy design, semi-open, made of sheet steel with feeding mechanism.
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Cartridge cutter
Cartridge cutter

CARTKNFE

For cutting plastic cartridges and precision cutting of plastic application nozzles to desired length and angle
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details