V-belt spray
SPR-BL-V-400ML
Register now and access more than 125,000 products
- Prevents slipping, transfers full drive power, eliminates squeaking
- Eliminates readjustment work with minor belt slip due to cold, moisture or due to normal elongation
- AOX-free
Only use in well-ventilated areas.
Datasheets(X)
For extending the service life of V-belts.
For V-belts made from leather, rubber, balata, hair etc. Not suitable for use on flat belts. When using V-belt spray, contact with the pulleys is increased - release and lubrication problems are reduced to a minimum. The efficiency of the V-belt is increased.
Fit the spray head and spray along the belt with the end of the spray tube following the inside of the belt closely. If the engine is running, spray in one position on the inside for approx. 5 seconds. Clean running surfaces before initial use. Use sparingly and precisely - avoid excessive application.
Chemical basis | Mineral oil |
Colour | Light yellow |
Density | 0.673 g/cm³ |
Smell/fragrance | Characteristic |
Boiling point | -44 °C |
Ignition temperature | 250 °C |
Silicone-free | Yes |
Acid-free | Yes |
AOX-free | Yes |
Resin-free | Yes |
Contents | 400 ml |
Container | Can |
Shelf life from production | 24 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!