Pneumatic brake piston set
Brake piston resetting tool set, 16 pieces
AY-(BRKCYL-PRES/ROTARYDEV)-PN-16PCS
Art.-no. 0714556230
EAN 4045989482917
Prices for customers after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at (23) 418-130.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
For resetting the brake piston on floating callipers.
- 16 pieces
- Universally suitable for VW, Opel/Vauxhall, DB, BMW, Audi, Ford, Honda, Toyota, Nissan, Rover, Mazda, Subaru, Mitsubishi etc.
- Complete in transport case
- Also for new vehicles with left-hand thread screwing device
Product information
Datasheets(X)
Instructions
- Connect compressed air spindle to the compressed air line using the adapter supplied
- Select a compression adapter suitable for the brake calliper and connect to the magnetic mounting on the spindle
- Press the bleed switch and pull back the spindle by hand as far as it will go. Position the tool on the brake calliper
- Permanent pressure can now be transferred to the brake piston using the pressure switch. The direction of rotation is determined by the angle section on the spindle. It is necessary to check beforehand, possibly by a slight rotational movement, whether the brake calliper has a right or left-hand thread. Excessive rotating forces in the wrong direction can damage the brake calliper
- Now turn back the brake piston into the calliper as far as it will go. The required pressure is transferred to the compressed air spindle, and reliably prevents slippage
- Press the bleed switch again, pull back the spindle by hand and take out of the brake piston