PTFE dry lubricant spray
DRYLUBSPR-PTFE-300ML
Register now and access more than 125,000 products
Remedies squeaking, creaking and jamming
Provides long-term protection against wear
10 µm film thickness
Can also be used with extremely small tolerances in precision engineering
Very high resistance
- Temperature resistant from -180 °C to +260 °C (temporarily)
- Permanently resistant to water, acids and bases
Mineral oil-free
Silicone-free
Smokers must wash their hands after use. Smoking contaminated tobacco products may cause health-related issues.
Datasheets(X)
Transparent, dirt-resistant dry lubricant for light to medium loads.
Suitable for dry lubrication of friction points. Can be used for metals, plastic, rubber etc. under low and medium loads. Ideal for sliding roof and seat rails, door hinges and locks, sliding doors, window tilt mechanisms, window locks, furniture hinges, drawers, guide rails, ball bearings, electrical switches etc. Also suitable as a release agent if applied economically.
Shake briefly before use. Spray a thin layer onto friction points or joints and allow to dry, drying time for a thin application: approx. 1-2 mins, drying time for a thicker application: approx. 5 mins.
Chemical basis | Polytetrafluoroethylene |
Colour | Milky-transparent (protective film) |
Density | 0.6 g/cm³ |
Smell/fragrance | Characteristic |
Min. temperature conditions | -180 °C |
Max. temperature conditions | 260 °C |
Boiling point | -44 °C |
VOC concentration (CH) | 588.66 g/l |
Silicone-free | Yes |
Acid-free | Yes |
Resin-free | Yes |
Mineral oil-free | Yes |
AOX-free | Yes |
Contents | 300 ml |
Container | Aerosol can |
Shelf life from production | 24 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!