EPDM butyl sealing tape for outdoor use
SEALTPE-RAL-OUTS-EPDM/BUTYL-1,2X150X20M
Art.-no. 0875350152
EAN 4050642137899
Individual price display after login
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at (23) 418-130.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Breathable, elastic and weather-resistant sealing tape.
Weather-resistant and vapour-permeable to the outside
- High resistance to UV and weathering for permanent, reliable seals.
- Provides a reliable seal against water from outdoors.
- Water vapour permeable membrane allows water vapour to permeate from inside to outside, thereby preventing moisture-related structural damage.
- Excellent resistance to weathering for a permanent, highly reliable seal.
Material compatible, compensating
- Compensates particularly well for component movements.
- In combination with EPDM sealing tape adhesive, a secure installation can be achieved even on slightly uneven substrates.
- Good compatibility with bitumen.
Notice
- Tape cannot be plastered over.
- Not suitable for W2.2-E in DIN 18533: High influence from pressurised water ≥ 3 m immersion depth.
- Not suitable for W3-E in DIN 18533: Non-pressurised water on ceilings covered with earth.
- Not suitable for pressurised water according to DIN 18195-6.
Application area
Product information
Datasheets(X)
Application area
- For outdoor joints, e.g. window sills, floor-level windows, balcony doors, exterior door sills, conservatories and façades.
- 1.2 mm thick version for joints behind perimeter insulating materials.
- Complies with W1.1-E in DIN 18533: Ground moisture and non-pressurised water for floor panels and walls in contact with the ground.
- Complies with W1.2-E in DIN 18533: Ground moisture and non-pressurised water for floor panels and walls with drainage in contact with the ground.
- Complies with W2.1-E in DIN 18533: Moderate influence from pressurised water ≤ 3 m immersion depth.
- Complies with W4.E in DIN 18533: Spray water on the wall socket as well as capillary water in and under walls in contact with the ground.
Instructions
- Substrates must be load-bearing, dry and free of dust and grease.
- To install, cut the sealing tape to the desired length, apply the EPDM sealing tape adhesive to the substrate and smooth out with a joint knife, apply the tape to the substrate and press lightly with a press-on roller.
- Ensure that the tape is not installed under tension.
- When using sealing tape with self-adhesive strips or when sealing components in contact with the ground, the tape must also be secured to the frame/element with a mechanical fixing according to DIN 18533.
Colour | Black |
Adhesive base | Butyl |
Chemical basis | Ethylene propylene diene natural rubber |
Width | 150 mm |
Thickness | 1.2 mm |
Length of roll | 20 m |
Design | With butyl adhesive strip |
Min./max. temperature resistance | -30 to 75 °C |
Building material class/conditions | B2 - Normally inflammable / in accordance with DIN 4102 |
Ultraviolet resistance | Yes |
Max. water-vapour diffusion resistance factor value µ | 5882 |
Elongation at break | 300 % |
Resistance against | Bitumen |