Több, mint 40.000 termék
D-G-H/TZN post support bracket
Post holder, D-G-H/TZN
POSTHOLD-DWL-HDG-(FRK80-160)-(H110-155)
Register now and access more than 125,000 products
- Adjustable in height and width
- Robust design for high loads
- Support bracket material: Steel S 235 JR in accordance with EN 10025:2004
- Surface: Completely hot-dip galvanised in accordance with DIN EN 1461, coat thickness 55 µm
- Utilisation class: Can be used for utilisation classes 1, 2 and 3.
Diameter of screws and bolts may only be max. 1 mm smaller than the diameter of the hole.
The respective basic conditions of the applicable anchor approval must be observed.
Datasheets(X)
Post support bracket fastener for wooden structures in interior and exterior areas with high load requirements and high requirements for width and height adjustment in an installed state.
The post is attached to the post support bracket and anchored to the floor using 4 ASSY 3.0 combination screws, d = 8 mm, and 1 M12 bolt.
Suitable fasteners:
- ASSY 3.0 combination screws, d = 8 mm
- M12 bolt
Recommended dowels (M12) for anchoring in concrete:
W-SA; W-FAZ; WVIZ; W-VM 250
 | |
Design | For static purposes |
Form | Variable U profile |
Min./max. width of bracket | 80-160 mm |
Max. width of bracket | 160 mm |
Number of D 13 mm holes | 6 PCS |
Min. width of bracket | 80 mm |
Fork height | 120 mm |
Fork depth | 80 mm |
Fork thickness | 4 mm |
Type description | Version U |
Unextended height | 110 mm |
Min./max. height (H) | 110-155 mm |
Suitable for min. post cross-section | 80 x 110 mm |
Baseplate format | 100 x 180 x 6 mm |
Pipe diameter | 42 mm |
Material | Steel |
Material designation of carrier | S 235 JR |
Holder material standard | DIN EN 10025:2004 |
Surface | Hot dip galvanized |
Coating thickness | 55 µm |
Surface standard | DIN EN ISO 1461 |
Use class | 3 |
Number of pieces | 2 PCS |
Weight | 2375 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!