D-G-H/R3R post support bracket
POSTHOLD-DWL-R3R-(FRK80-160)-(H135-160)
Art.-no. 0681492002
EAN 4045727045183
Register now and access more than 125,000 products
- Post support with width-adjustable fork connection and cover sleeve for base thread for extremely high aesthetic requirements.
- Height can be adjusted even when in an installed condition.
- Thread with cover cap for an elegant appearance.
- High-quality dark zinc-iron coating with high resistance to ageing and weathering.
- Support bracket material: Steel S 235 JR in accordance with EN 10025-2:2005-04.
- Base material: Steel S195T in accordance with EN 10255:2007.
- Surface: High-quality zinc-iron coating (R3R); coating thickness 8 µm.
- Utilisation class: Application in utilisation class 1 and 2.
ETA 13/0029 specifications must be observed.
Diameter of bolt may only be max. 1 mm smaller than the diameter of the hole.
The respective basic conditions of the applicable anchor approval must be observed.
Available work documents:
Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.
Datasheets(X)
Post support fastening for wooden structures in indoor areas with extremely high aesthetic requirements.
The post support bracket is bolted to the post base and anchored to the floor using 2 ASSY 3.0 Kombi screws, 10 x 80 mm, or ASSY 3.0 screws with countersunk milling pocket head, 6 x 80 mm, and countersunk washers.
Suitable fasteners:
- ASSY 3.0 Kombi 10 x 80 mm or ASSY 3.0 countersunk milling pocket head screws 6 x 80 mm with countersunk washer.
- Recommended anchors (M12) for fastening in concrete: W-SABS; W-FAZ; W-VIZ; W-VM 250.
 | |
Design | For static purposes |
Form | Variable U profile |
Min./max. width of bracket | 70-170 mm |
Max. width of bracket | 170 mm |
Number of D 13 mm holes | 6 PCS |
Min. width of bracket | 70 mm |
Fork height | 112 mm |
Fork thickness | 4 mm |
Type description | H002 |
Min./max. height (H) | 135-200 mm |
Suitable for min. post cross-section | 80 x 140 mm, 80 x 160 mm |
Baseplate format | 160 x 80 x 6 mm |
Material | Steel |
Material designation of carrier | S 235 JR |
Holder material standard | EN 10025-2:2005-04 |
Material designation of foot | S195T |
Base material standard | MSM 10255/2007 |
Surface | Zinc iron black |
Coating thickness | 8 µm |
Use class | 1, 2 |
Number of pieces | 2 PCS |
Weight | 2180 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!